;

What Is Secondary Machining, and When Does a Stamping Shop Offer It?

secondary machining

A stamped part can come off the press with most of its geometry complete and still need features the die cannot produce to the required specification. That is where secondary machining in metal stamping comes in. If the print calls for machining after stamping to add tapped holes, a milled face, a precision bore, or another feature that needs material removed after forming, the next question is whether the stamping supplier can handle that work too. In many cases, keeping both processes with one supplier can simplify the job, provided the shop has the right machining equipment and inspection process.

What Is Secondary Machining?

Secondary machining is material removal performed after the primary forming process, in this case after the part has been stamped. The stamped blank or formed component becomes the workpiece for operations such as drilling, tapping, milling, or other machining needed to finish the part.

That is different from choosing machining instead of stamping for the entire part. If you need a fuller refresher on how machining works, Precision Stamping covers the process separately. The company also has a guide to the differences between stamping and machining when the production-method decision itself is still open.

Why Stamped Parts Sometimes Need Machining

Stamping can produce complex formed parts with high repeatability when tooling and process controls are maintained, but not every required feature is best created in the die. Internal threads are a common example. A stamped hole can provide the starting location, while tapping adds the thread form needed for a fastener. Precision bores may also need machining when their diameter, roundness, surface finish, or relationship to another feature requires additional control after forming.

Machining is also useful for flat faces that need to be milled, features located on planes that are difficult to access in the stamping tool, or dimensions that need tighter control than the stamping process reliably holds for that specific feature. The right approach depends on the part, material, tooling, and tolerance stack. Precision Stamping’s metal stamping capabilities include in-house engineering and toolmaking, which gives buyers a place to review those requirements before the routing is finalized.

Common Secondary Machining Operations

Drilling adds or finishes holes that cannot be produced in the die, or whose final location depends on the formed geometry. Tapping then cuts or forms internal threads in the prepared hole. On programs with repeated threaded features, automation makes that step easier to build into production. Precision Stamping runs robotic and automated tapping as part of its machining services.

Milling removes material with a rotating cutter to create flat faces, slots, pockets, or contours. It is especially useful when the finished feature must reference geometry established during forming. Turning is also common across the industry for cylindrical features produced while the workpiece rotates against a cutting tool. If a part needs turned features, confirm how the supplier will handle them before the routing is finalized.

Benefits of Sourcing Machining From Your Stamping Supplier

Keeping stamping and machining with one supplier can reduce the number of times parts are packed, shipped, received, counted, and transferred between vendors. That can lower freight and handling and make scheduling easier because the machining step is part of the same production plan rather than a separate purchase order with another supplier.

It also creates one point of accountability when a machined dimension references a stamped feature. The same supplier can plan fixturing and inspection with knowledge of how the blank was formed and where variation is most likely to occur. That does not guarantee tighter tolerances, but it can reduce quality handoffs and make root-cause work more direct if a dimension moves. For buyers evaluating contract machining services alongside stamping, the practical benefit is coordination and fewer handoffs.

When to Keep Stamping and Machining Together vs. Splitting Them

Keeping the operations together often makes sense when machined features reference stamped datums or formed surfaces, production volumes are steady enough to justify a repeatable routing, or lead time is sensitive to outside processing. It can also help when the supplier is managing component inventory, since stamping, secondary work, inspection, and release can be scheduled around the same demand signal.

Splitting the work may be the better choice when the part requires a specialty process or machine the stamping supplier does not operate, or when an existing machining source has tooling and process knowledge that would be expensive to duplicate. The question is not whether one vendor is always better than two. It is whether the handoffs add risk, cost, or time that the combined supplier can realistically remove.

Questions to Ask Your Stamping Supplier About Machining

  • What machining equipment do you run, and which operations are performed in-house?
  • What part sizes and materials fit your machining equipment?
  • Is tapping manual, automated, or robotic for production work?
  • How do parts move from stamping to machining, and where can outside processing enter the routing?
  • How are stamped and machined features inspected when dimensions reference one another?
  • Who owns the job if a dimensional issue could have originated in either operation?

Why Work With Precision Stamping

Precision Stamping is a full-service stamping, fabrication, and machining company established in 1997. Its machining operation handles low- to high-volume work in ferrous and non-ferrous metals, plastics, and composites, with published workpiece capability from 1 inch square to 10 feet long. Combining stamping and value-added machining under one roof gives customers the option to keep more of the production routing with one supplier.

On the stamping side, Precision Stamping runs presses from 15 to 600 tons and provides in-house engineering, toolmakers, and life-cycle management from prototyping through end of product life. It also manages component inventory for as many as 400 SKUs for customers. For urgent machining work, the company states that parts can go into a machining center within 4 to 8 business hours of initial contact and receipt of the parts.

Talk to Precision Stamping About Stamped and Machined Parts

If your stamped component needs drilled, tapped, milled, or other machined features, review Precision Stamping’s machining capabilities to see whether the equipment fits your print and production volume. To discuss the full routing, tolerances, material, and quantities, contact the Precision Stamping team to request a quote.